 |
 |
| Parts Needed:
All available from Radio Shack
1- piezo transducer part
#273-073 |
First step is to solder the piezo leads to the phone phone jack tabs. I always solder the red lead to the tip tab. |
| MINI-TRIGGER |
|
|
| Parts Needed:
All available from Radio Shack
1- piezo transducer part
#273-073 |
First step is to solder the piezo leads to the phone phone jack tabs. I always solder the red lead to the tip tab. |
 |
 |
| Next, drill a hole in one
end of the project box for the phone jack. Assemble as shown placing the
piezo in the bottom of the box with the foam tape.
I also use a small piece of the tape to secure the wires from hanging loose inside. |
Screw the lid to the box (at
this point you can use this
to mount to various things you would like to use as triggers), cover
the lid with the rubber (I used double sided carpet tape) and you're done.
This makes a really neat effects trigger. |